porcelain; may be used to grind crystals and lumpy chemicals to a powder
Back
Test Tube Clamp
Front
clamp used to hold hot test-tube
Back
Thermometer
Front
an instrument used to measure temperature, consisting of a thin glass tube with a bulb on one end that contains a liquid (usually mercury or alcohol)
Back
Condenser
Front
used in distillation procedures
Back
Digital Scale
Front
An electronic scale with a sensor that measures weight and displays the result electronically.
Back
Disposable Pipet
Front
Used for "rough" solution measurements and transfer only. Typically, old pipettes are disposed of after testing in order to avoid cross-contamination.
Back
Pipestem triangle / Clay triangle
Front
triangular wire frame with clay material coverings
to support the crucible
Back
Beaker Tongs
Front
Used to move beakers containing hot liquids
Back
glass rod with nichrome wire
Front
used in flame tests
Back
Wire Gauze
Front
used to support a container (such as a beaker or flask) during heating. Used to spread the heat of a flame.
Back
Buret
Front
Used to measure volumes of solutions in titrations.
Back
Forceps
Front
used to pick up or hold small items
Back
Test Tube Rack
Front
to hold test tubes in an upright position, wood or plastic
Back
Side Arm Erlenmeyer Flask
Front
used in conjunction with Buchner funnel for vacuum filtration, 100 ml or 250 ml
Back
Glass pipet
Front
A piece of equipment that can measure and transfer liquids using a transfer bulb or pump
Back
Test Tube Brush
Front
Used to clean glassware
Back
Buchner Funnel
Front
filters solids from liquids using a mild vacuum
Back
Hot Plate
Front
An electrical device used to heat things up.
Back
Test Tube
Front
A cylindrical tube, usually smaller than a beaker; used for mixing or heating small amounts of liquids.
Small: (13mm x 100mm) Medium: (20 x 150mm) Large: (25 x 200mm)
Back
Crucible Tongs
Front
iron or nickel; used to pick up and hold small items.
Back
Volumetric Flask
Front
Used for precise dilutions and preparation of standard solutions
Back
RIng Stand
Front
a metal stand consisting of a long upright rod attached to a heavy rectangular base that is used with rings and clamps for supporting laboratory apparatus.
Back
Erlenmeyer Flask
Front
glassware with a wide base and with sides that taper upward to a short vertical neck; allows contents to be mixed by swirling.
Back
Ring Clamp
Front
attaches to a lab stand and used to hold a variety of lab equipment
Back
Watch Glass
Front
glass; used to cover an evaporating dish or beaker
Back
Wash Bottle
Front
used to rinse various pieces of laboratory glassware
Back
Bunsen Burner
Front
A gas burner used in laboratories
Back
Double Burette Clamp
Front
Two sided clamp used to hold burettes on a ring stand
Back
Triple Beam Balance
Front
instrument used to measure mass
Back
Crucible and Cover
Front
porcelain; used to heat small amounts of solid substances at high temperatures
Back
pipet bulb
Front
rubber; used in filling a pipet with a solution; a pipet must never be filled by mouth
Back
Test Tube Holder
Front
Used to hold one test tube, usually during heating or transporting test tube. Or glass tubing
Back
Scoopula
Front
small scoop used to transfer powder and crystal chemicals/metal or porcelain
Back
Evaporating Dish
Front
porcelain; used to contain small volumes of liquid being evaporated
Back
Test Tube Stopper
Front
used to seal test tubes or flasks
Back
Florence Flask
Front
may be heated; used in making and for storing solutions
Back
Analytical Balance
Front
Extremely accurate scale; measuring to the 0.001 place
Back
Glass Stir Rod
Front
Used to manually stir solutions. Can also be used to transfer a single drop of a solution.
Back
Graduated Cylinder
Front
a tool used to measure the volume of liquids, common sizes are 10 ml, 50 ml, 100ml.
Back
Funnel
Front
Used to transfer liquid without spilling
Back
Beaker
Front
Holds liquids; Used for heating liquids; 100ml, 250 ml, 400ml